 |
|||
|
Basically the possibilities for the production of double sided PCB´s are almost unlimited – please contact us. |
|||
|
Product information: |
|||
| Material |
IS 415, IS 420, IS 620, Polyimid High frequency materials e.g. teflon, Roger 4003, Ceramic filled material Other special material: Customer request |
||
| Cu thicknesses | Up to 600 µm | ||
| Size | Up to 600 mm x 420 mm | ||
| Heat-Sink |
From aluminum, copper, CIC, CMC or Heat sink paste Surfaces and thicknesses: Customer request - Cold gluing - Warm gluing with No flow Prepreg or acryl adhesive - Heat sink paste in the silk-screen printing, thicknesses to 1 mm - 2 metal cores with a thickness of up to 0.5 mm can be included |
||
 |
|||
| Reliability | Special built-up: 1000 cycles -65° C to + 150° C | ||
| Surfaces |
-
Cover foils for the increase of insulation resistance - Soldering varnish - Mixed surface finish - Other organic Cu surfaces: Customer request |
||
| Low milling / Countersinks | On both sides, accuracy + 0.1 mm of depth tolerance, 60°/90°/120° | ||
| Further options | Press fit technology, Burried- & Blind Vias | ||
|
|
|
||
|
4 ML, assembled |
Multilayer with 90° right-angled Heat Sink, Material:Cu - nickel |
||
|
If you have any special requirements, please contact us. |
|||
