 |
|||
|
Thickness 0.05 mm - 5 mm |
|||
|
Product information: |
|||
| Material | FR 2, FR 3, FR 4 |
 |
|
| Cu thickness |
- 17 µm, 35 µm, 70 µm, 105 µm - Others: Customer request |
||
| Surface |
-
Solder mask - HASL (lead-free and tin-leaded 63/37) - Immersion or galvanic Ni/ Au - Immersion or galvanic Sn - Refused Pb/Sn |
||
| Reliability | 1000 cycles: - 65° C to + 125° C | ||
| Width/ gap | Depending upon Cu thickness: Minimum 80 µm / 80 µm | ||
| Outline | Cutting, Routing, Punching | ||
| Outline tolerance | Up to 200 mm +/- 0.1 mm, otherwise +/- 0.15 mm | ||
| Slit width |
-
Routing
> 0.4 mm + 0.1 mm - Slot drilling > 0.4 mm + 0.1 mm |
||
| Slit tolerance pth | +/- 0.15 mm | ||
| Diameter tolerance pth | + 0.1 mm / - 0.05 mm | ||
| Smallest hole diameter | 0,1 mm (finished hole) | ||
| Aspect ratio | Standard 1: 4, special up to 1:10 | ||
| Diameter tolerance not plated |
0.4 - 5.0 mm: +/- 0.05 mm > 5.0 mm: +/- 0.15 mm |
||
| Drill position accuracy |
< 300 mm: +/- 0.05mm > 300 mm: +/- 0.1 mm |
||
| Bow & Twist | < 1 % | ||
 |
 |
||
|
Keyboard: 2 layer with galvanic Au finish, low-milled outline for the installation of LCD displays |
2 layer PCB with SMD in cutting an milling technology, different depth of cutting for an easy break out after assembly |
||
|
Special engineering possible. Examples and further details please have a look at double sided PCB special engineering |
|||