 |
|||
|
Rigid Mulilayer up to 24 layers. Thickness from 0.5 mm - up to 5 mm. |
|||
|
Product information: |
|||
| Material | FR 4 |
|
|
| Cu thickness |
- 17 µm, 35 µm, 70 µm, 105 µm - Others: Customer reques |
||
| Reliability | 1000 cycles: - 65°C to + 125°C | ||
| Surfaces |
-
Solder mask - HASL - Immersion or galvanic Ni / Au - Immersion or galvanic Sn - Refused Pb/Sn |
||
| Width/ gap | Depending upon Cu thickness: Minimum 80 µm / 80 µm | ||
| Outlines | Cutting, Routing | ||
| Outline tolerance | Up to 200 mm +/- 0.1 mm, otherwise +/- 0.15 mm | ||
| Slit width |
-
routing
> 0.4 mm + 0.1 mm - slot drilling > 0.4 mm + 0.1 mm |
||
| Slit tolerance pth | +/- 0.15 mm | ||
| Diameter tolerance pth | + 0.1 mm / -0.05 mm | ||
| Smallest hole diameter | 0,1 mm (finished hole) | ||
| Aspect ratio | Standard 1:4, special relationship 1:10 | ||
| Diameter accuracy not plated |
0.4 - 5.0 mm +/- 0.05 mm > 5.0 mm +/- 0.15 mm |
||
| Drill position accuracy |
< 300 mm +/- 0.05 mm > 300 mm +/- 0.1 mm |
||
| Bow & Twist | < 1 % | ||
|
|
|
||
|
8 ML with Cu cores inside (CIC) for thermal management and for compensation of expansion surface finish partial galvanic Au |
4 ML, assembled Range of use: Optics |
||
|
Special engineering possible. Examples and further details please have a look at double sided PCB special engineering |
|||
