 |
|||
|
Product information: |
|||
| Material |
FR 4, Kapton with adhesive component
All polymide Kapton, Flexlam |
Backpanel, Mil test Range of use: Aerospace |
|
| Cu thickness |
- 17 µm, 35 µm, 70 µm, 105 µm - Flex 18 µm, 35 µm, 70 µm - Others: Customer request |
||
| Surfaces |
-
Solder resist - Immersion or galvanic Ni / Au - Immersion or galvanic Sn - Refused Pb/Sn |
||
| Reliability | 1000 cycles: - 65° C to + 125° C | ||
| Width / gap | Cu thickness minimum 80 µm / 80 µm | ||
| Outlines/ Tolerances | Cutting, Routing / up to 200 mm +/- 0.1 mm, otherwise +/- 0.15 mm | ||
| Slit width | Routing, slot drilling > 0.4 mm: + 0.1 mm | ||
| Slit tolerance pth | +/- 0.15 mm | ||
| Diameter tolerance pth | 0,1 mm (finished hole) | ||
| Aspect ratio | Standard 1:4, special relationship 1:10 | ||
| Diameter accuracy not plated |
0.4 - 5.0 mm: +/-
0.05 mm |
||
| Drill position accuracy |
< 300 mm: +/- 0.05 mm > 300 mm: +/- 0.1 mm |
||
| Bow & Twist | < 1 % | ||
 |
 |
||
|
10 layer Rigid-Flex Burried- and Micro vias Impedance - controlled with Mil test strip Size 600 x 420 mm |
3 layer Semi-Flex Rigid-Flex Current load up to 400 A |
||
|
Special
engineering possible. |
|||
